Default UI Menu: Modify/Modify 3D Objects/Facet Editing/Facet Edit

Ribbon UI Menu:

Enables to move or rotate individual facets of a solid (not surface) object.

1. Select the facet you want to edit. Before it is selected, the facet is highlighted in green and indicated by a green square at its center.

When the facet is selected, all its other facets are indicated by a blue square. You can select another facet for editing at any time while the tool is active. The selected facet appears similar to Select Edit mode, with rotation handles for the three axis (relative to the facet plane), and a yellow reference point for moving.

1. Drag the facet by its reference point to move it normal to its current plane.

1. You can also rotate about X or Y to change its angle relative to adjacent facets.

1. You can rotate around Z to "tilt" the facet sideways.

1. Lastly, you can delete a node by selecting it and pressing the Delete key. This is possible only when the ACIS object can be reconstructed without the facet.

Note: If you want to delete a facet without reconstructing the object, you can convert the solid to a surface.

Inspector Bar options:

Properties: Opens the Facet Editor Properties. The options here are the same as for the 3D Selector. See 2D-3D Selector

Make Copy: Copies the Selected Face

Edit Reference Point: Moves the reference point of the facet, located by default at the facet center.

Moving the reference point enables you to rotate the facet about different axes.

Note: You can also press the D key to select and move the reference point.

Default Reference Point: If the reference point was moved, this option moves it back to its default location at the center of the facet.

Default Rotation Bars: If the Rotation bars were moved, this option moves it back to its default position.

UCS by Selector: This option selects the user coordinate system by selector.

Selector by UCS: This option sets selector by user coordinate system.

Lock Axis: This will lock the axis.

Toggle Facet / Feature:

Delete Face(s): Deletes the selected face

These Options can be accessed in Local Menu:

Select Feature or Defeature Part

Select a single face and the tool will select all similar classes of faces by blending networks, depressions, or protrusions of a part body. Combined with a remove face, this tool is useful to replace a feature from an imported part (no history) or to defeature a part.

Blend Network: Selects blends of edges/facets.

Blend Sequence: Selects single edge/facet

Depression: Selects depression of face(s)

Protrusion: Selects extension below or above a surface.

Note: The Facet Editor can work in multiple, open drawing windows.