Home / Docs / DesignCAD 2027 User Guide / Annotation / Hatching / Intelligent Hatch

Intelligent Hatch

Intelligent Hatch

Estimated reading: 3 minutes 100 views


Menu: Draw / Hatch

Fills an enclosed area of a 2D drawing with a hatch pattern that stays associated with its boundary objects.

When a supported boundary is moved, reshaped, or edited, the hatch updates automatically. You do not need to delete and recreate it. Intelligent Hatch is available in 2D mode only.

The following methods are available for defining the area to fill:

Pick Inside Region: Click inside an enclosed area. A preview of the detected region appears, including any interior holes and nested regions. Confirm to create the hatch.

Select Boundary Objects: Select the objects that form the boundary, review the detected region, and confirm. Use this method when automatic detection does not find the area you want. Supported boundary objects are lines, polylines, planes, circles, arcs, Bézier curves, control curves, and splines.

Hatch Dialog Settings

When you start the Hatch command, the Hatch dialog opens. Use it to set the pattern properties before creating the hatch:

  • Hatch Scale: Sets the size (spacing) of the hatch pattern.
  • Hatch Angle: Sets the rotation angle of the pattern.
  • Hatch Aperture: Sets the gap value used to treat small openings in the boundary as closed.
  • Image: Lets you use an image or a hatch pattern as the fill. Choose the image or pattern using the buttons next to the Image field. The preview box shows the selected pattern.
  • Use image reference only: Uses the image as a reference instead of embedding it.
  • Seamlessly: Tiles the image continuously without visible seams.
  • Use Screen Area: Applies the hatch relative to the screen area.
  • Same As: Copies the hatch settings from an existing hatch.

If the preview is not what you expected, the boundary may have gaps. Intelligent Hatch can treat small gaps as closed, based on a gap tolerance you set in drawing units, without changing the original objects. Use Show Gaps to display temporary markers at openings in the boundary geometry. Gaps larger than the tolerance, or ambiguous boundaries, may need manual correction or explicit boundary selection.

Once created, the hatch updates when you change its boundaries. Supported changes include moving, transforming, vertex editing, and certain trim, extend, offset, break, join, and polygon Boolean operations. Pattern scale, orientation, and origin are kept through these updates.

Managing Hatches

The hatch management command is on the Tools menu, immediately after 3D Print Check. It provides these commands:

  • Recalculate Hatch: Rebuilds the hatch from its referenced boundary objects.
  • Highlight Boundary: Temporarily emphasizes the objects associated with the hatch.
  • Select Referenced Objects: Selects the boundary objects linked to the hatch.
  • Relink: Reconnects the hatch to replacement boundary objects if the originals were replaced.
  • Convert to Static Hatch: Keeps the current appearance, but the hatch no longer updates when its former boundaries change.

The management tools also give access to hatch properties, gap tolerance, and diagnostics. Diagnostics explain missing, invalid, unsupported, or ambiguous boundary associations.

Associations are saved in native DCD drawings, in both model space and paper space, and are kept when the drawing is reopened. Undo and Redo coordinate hatch updates with the corresponding drawing edits.

NOTE: Hatching on tilted planes or in 3D workflows is not supported. Live hatch associations within inserted blocks are not supported. DWG associative-hatch interoperability is not supported. Unsupported or ambiguous boundary geometry may require explicit boundary selection or manual repair.

Leave a Comment

Share this Doc

Intelligent Hatch

Or copy link

CONTENTS
Antimanual

Ask our AI support assistant your questions about our platform, features, and services.

You are offline
Chatbot Avatar
What can I help you with?