Task Drawing & Worksheet

What you will learn in this Session

During this session you will learn how to :

• A circle will be swept along the path created by the helix drawn in the 2D Tutorial of this Session.
• A pipe will be created from a single line to form an axis for Part 3.
• Parts will be combined.

Introducing

The following tools will be used during this Session :

• Rail Sweep.
• Pipe.
• Add Solid.

Information about this Session

• This drawing forms part of a 5-part assembly. The assembly of these parts is shown in [Session 8](3D Session 08_00.htm).
• Some views in the illustrations may be rotated for illustrative clarity. Should you wish to rotate view to reflect the view shown in the illustrations, use View > Rotate View.
• The sample drawing for this session contains the 2D Sketch and the 3D Model. Frequently, these 2 layers are superimposed. Use the Concept Explorer to control the display of the layers. Create your own layers if you wish to produce the design from scratch or pan to an unused area of the editor.

Estimated Session Duration

• Approximately 30 minutes drawing time. Total session duration may vary.