What you will learn in this Session

• During this session you will learn how to :
• Use simple draw tools such as Rectangle, Parallel Line.
• Use basic modification tools such as lengthening a line.
• Use the Snaps and LogiCursor to insert circles on centers and intersections.
• Create Fillets and Chamfers.
• Insert Dimensions and CenterMarks onto the sketch.

Introducing

The following tools will be used during this Session :

• Rectangle
• Parallel Line
• Center Point Circle
• Dynamic Extend
• Fillet
• Chamfer
• Dimension Tools

• text

Information

• These sketch and modification tools are used in the construction of most sketches.
• The sketch geometry created in this Session will be used to build the model in the 3D Tutorial of this Session. Save your design at the end of the Session.
• Should you wish to retain the sketch in order to produce the engineering drawing, save a copy of the 2D sketch to a separate drawing name.
• The sample drawing for this session contains the 2D Sketch and the 3D Model. Frequently, these 2 layers are superimposed. Use the TurboCAD Explorer to control the display of the layers. Create your own layers if you wish to produce the design from scratch or pan to an unused area of the editor
• Downloadable Session Drawings can be found here

Estimated Session Duration

• Approximately 30minutes drawing time. Total session duration may vary.